Through a newly developed two- layer coating technology, KTP-SR plate brings exceptional quality and long run press performance without the need for post baking. It delivers high resolution and precise tone reproduction in the most demanding press environments.
Konita KTP-SR High Durability Thermal CTP Plate
Through a newly developed two- layer coating technology, KTP-SR plate brings exceptional quality and long run press performance without the need for post baking. It delivers high resolution and precise tone reproduction in the most demanding press environments, such as UV ink and alcohol substitute founts. The state of the art technology also provides wide processing latitude to achieve excellent stability and FM imaging capability. KTP-SR plate is suitable for a wide range of commercial, newspaper and packaging applications, and is ideal for customers who need a robust thermal CTP plate.
No preheat, positive working, thermal digital plate with excellent chemical and press durability; no need baking for UV ink printing
Commercial, newspaper and packaging print applications
Electrochemically grained and anodized aluminum substrate
0.15 mm- 0.40 mm
780 nm- 850 nm
Exposure Energy Required
120 mJ / cm2- 150 mJ / cm2 depend on imager type, configuration and resolution
1% -99% @ 400lpi or 10 micron stochastic
Depend on capability of imaging device
Konita DV-T series developers
Dynamic supplement 80-120ml / ㎡, Static supplement 100-120ml / h
25 ± 3 ℃
25 ± 5s
400,000 impressions unbaked
1,000,000 plus impressions baked
100,000 impressions for UV ink application
Depend on image resolution, press, press chemical, ink and paper conditions
18 months, with original sealed package, stored in a cool and dry environment, away from sunlight
KTP-SR Processor Set-up:
Konita New Materials recommends a dip tank Thermal Plate processor or similar.
3.00 FT. / MIN
Dwell time (Dip To Nip)
25 SECONDS (+/- 2 SECONDS)
Brush developer rollers speed and configuration
TWO DEVELOPER BRUSH ROLLERS IN DEVELOPER SECTION
AIM 24 ° C
RANGE 22 ° C TO 28 ° C
Developer & Replenisher
DV-T Developer ready to use
Developer replenishment rate
7-10 ml per sq./ft.
Every ½ hour @ 10-12 ml per sq./ft.
200 sq./ft. Per gallon
Expected developer life
Low to med. Volume customers = 1-2 months.
High volume customers = 1 month or less depending on volume
Finisher solution life
7 working days. Replenish with half strength or full strength as needed.
35-45 ° C (plate should be dry exiting processor)
Postbaking conditions (optional)
3.28 ft./min. @ 500 ° – 525 ° F